-
10/082020
How to choose the right ...
The selection of connectors must consider both performance requirements and economic factors. The performance must meet the requirements of the electrical equipment of the system
-
10/072020
How can RF coaxial conne...
For RF coaxial connectors in adapters or cable connectors, due to the difference in socket size, it is difficult to avoid the transition of conductor cross-sectional size from small increase or large
-
09/282020
Application and professi...
The radio frequency coaxial connector (hereinafter referred to as the RF connector) is usually regarded as a component attached to a cable or installed on an instrument as a component for electrical c
-
09/282020
What do you need to pay ...
Optical fiber connector (hereinafter referred to as RF connector) is generally regarded as a component installed on a cable or installed on equipment, as a coaxial cable protective grounding or separa
-
09/182020
RF connector market deve...
In order to adapt to the development of miniaturization, modularization, high-frequency, high-precision, and high-reliability of the whole machine equipment, new products of RF connectors are constant
-
09/142020
SMT processing solder jo...
With the advancement of technology, some electronic products such as mobile phones and tablet computers have become light, small and portable.
-
09/142020
What is the difference b...
In this morning of the Internet era, each of us uses mobile phones. How much do we know about the phone deck? I think few people know about this deck because our deck is It is set inside the mobile ph
-
08/202020
How to linearize the RF ...
The non-linear distortion of the RF power amplifier will cause it to generate new frequency components. For example, for the second-order distortion, it will produce the second harmonic and two-tone b
-
08/202020
What are the criteria fo...
The standard for judging non-linearity and linearity can be: use a fixed frequency f1 and level input to the amplifier, observe the output of the amplifier, if its output contains additional frequency
-
08/202020
What is a broadband powe...
The signal amplified by the amplifier has a lot to do with the frequency of the signal. If the frequency is too high or too low, the operational amplifier will have a lot of distortion when amplifyin
Copyright © Xiamen Lineyi Electronics Co., Ltd All rights reserved.
点击右上角
分享给朋友吧
